Three crucial steps to note before installing your magnetic sign:
The magnetic sign will be delivered in a roll foam
The magnetic sign needs to be straightened before application
To straighten the sign, gently flex it in the opposite direction
Tips for magnetic signs for best care:
Weekly removal and cleaning of the vehicle and Magnetic Signs help avoid magnetic polarisation of the vehicle’s surfaces under the magnetic sign.
It is recommended that magnetic signs be removed, inspected, and cleaned after every significant rain or snowfall event.
Make sure to completely dry your magnetic sign and the vehicle surface after cleaning.
Don’t drag the magnet across the surface of the car. If you need to reposition the sign, remove it by pulling back on a corner. This protects the finish of the vehicle.
Don’t apply the magnet over rust, trim work, deep curves, or vinyl car wraps. These things create air gaps, which prevent the magnetic sheeting from fully gripping the metal. As a result, the sign is likely to fall off.
Don’t trap water or grit between the magnet and vehicle surface. Not only does this create an air gap, but it can damage the finish of the vehicle.
Electrical Panel Must Be Kept Clear Magnetic Sign (Non Reflective) - FAQ